Craftsman 917276221 garden tractor Parts

Craftsman engines are made by multiple manufacturers, depending on the specific mower or tractor. For Craftsman model 917276221, the engine is a low-emission internal combustion design; the exact engine manufacturer is identified on the engine label and in the specifications section of the 917276221 owner's manual.

How to identify who made your Craftsman engine

Use these quick checks on your Craftsman garden tractor:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the engine model, type, and code (or spec number)
• Match that information to the engine maker’s format (common on Briggs & Stratton, Kohler, and Kawasaki)
• Confirm the tractor’s configuration in the Product specifications section of the 917276221 owner's manual
• Use the engine model number when ordering engine-specific parts (filters, plugs, carburetor parts)

Common engine makers used on Craftsman outdoor power equipment

Craftsman has historically sourced engines from several major manufacturers. The most common you will see on riding mowers and garden tractors include:

Engine maker	What you’ll usually see on the label	Typical use cases
Briggs & Stratton	Model-Type-Code format	Many residential tractors and mowers
Kohler	Command/Courage/7000 series style model and spec	Mid to higher horsepower tractors
Kawasaki	FR/FS/FX series style model	Premium residential and some prosumer units

Why it matters

The tractor model number (917276221) helps us match chassis and deck parts, but the engine maker and engine model determine the correct tune-up parts and many engine repair parts. Using the engine label prevents ordering the wrong air filter, spark plug, or fuel system parts.

Last updated: January 2026

For Craftsman garden tractor model 917276221, the owner’s manual specifies a low-emission gasoline engine and identifies the tractor as a 22.0 HP, 54-inch mower configuration. For the exact engine make, model, and service specs, use the engine identification information in the 917276221 owner's manual.

How to identify the exact engine on your 917276221

Use these quick checks to match the correct engine parts and tune-up specs:

• Look for the engine ID label on the blower housing, valve cover, or near the starter
• Record the engine model, type, and code (common on Briggs & Stratton engines)
• Compare the engine label to the manual’s maintenance and troubleshooting sections
• Match air filter, oil filter, spark plug, and fuel filter by engine ID (not just tractor model)
• If the label is missing, use the tractor’s build details and parts diagrams to narrow it down

What we can confirm from the manual (model 917276221)

The documentation for this model describes the tractor and its power rating.

Item	What the manual indicates	What you use it for
Tractor model	917276221	Ensures correct chassis and deck parts
Power rating	22.0 HP	Helps confirm the correct engine family range
Deck size	54-inch mower deck	Helps match blade, belt, and mandrel components
Engine type	Low-emission gas engine	Guides starting, choke use, and maintenance approach

Why it matters

Engine brand and engine model determine the correct tune-up parts and settings (oil type/amount, spark plug gap, air filter style). Using only “Craftsman riding mower engine” can lead to the wrong parts even when the tractor model is correct.

If you are troubleshooting starting or blade engagement issues while identifying the engine, common related components on this model include the lawn tractor starter solenoid 582042802 and the switch.pto 582107601.

Last updated: January 2026

Replacing the engine on a riding mower like the Craftsman 917276221 typically costs about $260 to $1,800 installed, depending on the engine type, labor rates, and whether related items (battery cables, fuel lines, belts) need attention. Plan on around 6 labor hours for many riding mower engine swaps.

What drives the total cost

• Engine price (new vs. rebuilt, horsepower, crankshaft size, charging system)
• Labor time (engine removal, pulley swaps, wiring, throttle/choke setup)
• Extra parts often replaced at the same time (spark plug, fuel filter, air filter, oil)
• Condition of the tractor (rusted fasteners, damaged wiring, worn belts)
• Shop minimums and pickup/delivery fees

Typical cost breakdown

Cost item	Typical range	Notes
Engine (part only)	$200 to $1,400	Biggest variable; match crankshaft specs and mounting pattern
Labor	$200 to $700	Often 4 to 8 hours depending on complexity
Fluids and tune-up items	$20 to $120	Oil, filter, spark plug, fuel filter
Misc. hardware/wiring	$0 to $150	Terminals, clamps, damaged connectors

Why it matters (and when replacement makes sense)

A correct engine match protects the tractor’s electrical system and driveline, and it helps prevent overheating and premature failure. Your 917276221 manual also emphasizes keeping the engine cooling areas clean (grass screen, cooling fins, shrouds) because restricted airflow can cause engine damage.

Before you buy an engine

Use the 917276221 owner’s manual to confirm the engine specifications and maintenance requirements, then check these items so you do not install a new engine into a tractor with existing problems:

• Verify crankshaft diameter/length and keyway match your pulley setup
• Inspect wiring for brittle insulation or loose connections
• Replace stale fuel and consider a seasonal fuel filter replacement
• Clean grass buildup under the deck to reduce load and overheating
• Check the muffler condition (corrosion can create safety and performance issues)

Last updated: January 2026