Craftsman 48624628 brush guard Parts

The model number for this Craftsman brush guard is typically printed on the product identification label or on the original packaging; once you confirm it reads 48624628, you can match hardware and diagrams using the 48624628 owner's manual.

Where to look on a Craftsman brush guard

Check these common spots first:

• On a sticker or stamped tag on the brush guard frame (often on the back side)
• Near the mounting points or frame brace area
• On the shroud or inside edge of the guard where it is protected
• On the carton, assembly bag, or instruction sheet if you still have them
• On your purchase paperwork (model is often listed with the attachment name)

What to write down (so parts match)

Record the model number exactly as shown, plus any extra identifiers.

Item to record	Example	Why it matters
Model number	48624628	Ensures diagrams and parts lists match
Brand	Craftsman	Helps narrow compatible attachments
Part numbers on hardware bags	43350, 43070	Speeds up finding the right fasteners

Why it matters

Craftsman attachments can look similar across model families, but small differences in mounting hardware and latch components affect fit. Confirming 48624628 helps you select the correct brush guard parts such as a latch spring or end cap.

If the label is missing or unreadable

Use these identification clues to match the correct parts list:

• Compare your latch style to the lawn tractor brush guard attachment latch 66696BL3
• Check whether your guard uses an end cap like the lawn tractor brush guard end cap 28713
• Match your frame brace shape to the lawn tractor brush guard frame brace 26729BL1

Last updated: March 2026

To troubleshoot the Craftsman 48624628 brush guard, focus on fit, alignment, and latch operation: most issues come from loose hardware, a misaligned frame brace, or a worn latch/spring. Use the diagrams and assembly steps in the 48624628 owner's manual as you inspect.

Common symptoms and fixes

• Rattling or vibration: tighten mounting fasteners; replace worn washers or lock nuts
• Won’t latch or pops open: inspect the latch and spring for wear, bending, or loss of tension
• Guard sits crooked: check the frame brace and mounting points for bending; re-square and retighten
• Interference with hood/grille: loosen mounts, reposition to center, then tighten evenly
• Missing protective pieces: replace end caps or shroud to prevent sharp edges and reduce flex

Step-by-step troubleshooting (10 minutes)

1. Park on level ground, shut off the mower, remove the key, and let hot surfaces cool.
2. Grab the guard and try to move it; any movement at the mounts means hardware needs tightening.
3. Verify the latch fully engages; replace the lawn tractor brush guard attachment latch 66696BL3 if it is bent or won’t hold.
4. Check spring tension; replace the lawn tractor brush guard latch spring 42117 if the latch feels weak.
5. Inspect the brace and guard for bends; replace the lawn tractor brush guard frame brace 26729BL1 if it is deformed.

Hardware check (what “good” looks like)

Item	Good condition	Replace when
Fasteners	Tight, threads clean	Stripped, rusted solid, won’t torque
Latch	Closes smoothly, holds firmly	Won’t stay closed, visibly bent
Spring	Snaps latch closed	Stretched, broken, low tension

Why it matters

A brush guard that is loose or misaligned can damage mounting points over time and may contact the mower body. Keeping the latch and brace tight helps protect the front end and reduces vibration.

Last updated: March 2026

The average lifespan of the Craftsman 48624628 brush guard is 10 to 15 years with normal residential use and basic care (keeping hardware tight and preventing rust). You can confirm maintenance and inspection points in the 48624628 owner's manual.

What affects brush guard lifespan most

These factors determine whether you land closer to 10 years or 15 years:

• Impacts (curbs, stumps, trailer ramps) that bend the guard or mounting points
• Corrosion from fertilizer, road salt, or storing outdoors
• Loose fasteners that let the guard vibrate and oval out mounting holes
• Missing protective pieces (end caps, shroud) that expose edges to damage
• Frequent removal and reinstallation without re-torquing hardware

Quick inspection checklist (seasonal)

We recommend checking these items at the start of the mowing season and mid-season:

• Verify the latch engages fully; replace a weak spring like the lawn tractor brush guard latch spring 42117
• Confirm the guard is not contacting the hood, grille, or tires
• Tighten mounting bolts and replace stripped nuts or washers as needed
• Look for cracks at welds and mounting tabs
• Touch up chipped paint to slow rust

Typical replacement triggers

What you see	What it usually means	What to do
Guard rattles or won’t stay latched	Worn latch parts or weak spring	Inspect latch and spring, replace if needed
Guard sits crooked	Bent frame or brace	Inspect brace and mounting points
Rust-through or sharp edges	Advanced corrosion	Replace the damaged section or assembly

Why it matters

A solid brush guard protects the front of your riding mower or tractor from light impacts and debris. Keeping the latch and mounting hardware in good shape prevents vibration damage and helps the guard stay aligned.

Last updated: March 2026