Craftsman 917258940 46" mower deck excess grass clipping blow-out Parts

For Craftsman model 917258940, the mower’s exact age usually cannot be confirmed from the model number alone; you’ll need the product serial number (from the ID label) and, in many cases, the engine date code. Once you have those codes, we can narrow the build date to a specific month and year.

On most Craftsman riding mowers and tractors, the ID label is typically in one of these spots:

• Under the seat pan (lift the seat)
• On the rear fender pan near the seat
• Under the hood near the frame rail
• On the mower deck shell (less common for the tractor’s serial)

If you’re working specifically with the deck assembly for 917258940, also note the deck can have its own identifiers that do not always match the tractor’s build date.

Craftsman serial formats vary by production run and manufacturer, so we use the serial label format to choose the right decoding method.

• Look for a clearly labeled DOM (date of manufacture) or a stamped date
• Check for a 6-digit or 8-digit date pattern (often month/day/year or year/month/day)
• If the tractor label is unclear, use the engine’s model/type/code tag as a second source
• Compare the tractor serial date to the engine date; they should be reasonably close

Knowing the build date helps us match the correct parts and revisions for your Craftsman 917258940 deck setup, especially for wear items like belts, pulleys, and blade-drive components.

If you’re troubleshooting deck issues while you’re identifying the mower’s age, these are frequent service items for this model’s parts list:

• Lawn tractor v-belt 532144959 (blade drive belt)
• Lawn tractor blade idler pulley 532139245 (maintains belt tension)
• Husqvarna lawn tractor idler arm return spring 532105709 (returns idler arm, helps tension)
• Husqvarna lawn tractor 46-in deck mulching blade 532152443 (blade condition affects cut quality)

Last updated: January 2026

Yes, a light coat of WD-40 can help reduce grass buildup under the Craftsman 917258940 46-inch mower deck for a short time, especially when mowing damp grass; however, it wears off quickly and you still need safe cleaning and correct deck setup to reduce blow-out.

• Shut off the engine, remove the key, and let all moving parts stop.
• Let the deck cool before spraying anything near belts or pulleys.
• Apply a light mist to the underside of the deck shell only; wipe off excess.
• Avoid spraying the belt path, idler pulleys, mandrel pulleys, and spindle/mandrel areas.
• Reapply as needed; it is not a permanent coating.

Grass sticking is usually a mix of moisture, airflow, and blade condition. On the 917258940 deck, these checks typically help most:

• Mow when grass is dry; wet clippings pack and smear.
• Raise cutting height slightly in heavy growth and slow ground speed.
• Keep blades sharp and balanced; dull blades tear grass and create clumps.
• Clean the underside regularly (scrape, then rinse lightly and dry).
• Confirm the deck is level side-to-side and has the correct front-to-back pitch.

If you are still getting excess clippings or poor discharge, inspect wear items that control cutting and airflow.

Reducing buildup under the deck helps maintain airflow, improves cut quality, and can reduce strain on the blade drive belt and idler system. That can mean fewer clogs, less blow-out, and more consistent mowing results.

Last updated: January 2026

For the Craftsman 917258940 46-inch mower deck, the most commonly replaced items are the wear-and-movement parts that take constant load: the deck drive belt, idler pulleys, mandrel (spindle) components, and blade mounting hardware. These parts directly affect cut quality and grass clipping discharge.

• Husqvarna lawn tractor drive belt, 1/2 x 83-3/4 in 532139573: transfers power to spin the blades; a stretched or glazed belt slips and reduces blade speed.
• Lawn tractor blade idler pulley 532139245: maintains belt tension; worn bearings cause squeal, vibration, and belt wear.
• Flat idler pulley 532123674: guides the belt; a seized pulley can shred the belt quickly.
• Lawn tractor mandrel assembly 532143651: the blade spindle assembly; worn bearings create rumbling and uneven cutting.
• Husqvarna lawn tractor blade bolt 532850857: secures the blade; replace if threads are damaged or the bolt is stretched.

These components are normal wear items on riding mower decks. Heat, dust, moisture, and constant belt tension gradually wear bearings, pulley surfaces, and belt material, which then shows up as blow-out, clumping, or an uneven cut.

• Match parts to model 917258940 (deck parts can vary by sub-model).
• Inspect for secondary damage (a bad pulley often ruins a belt).
• Replace hardware that is rounded, rusted, or has damaged threads.
• After installation, verify belt is seated in every pulley groove.

Last updated: March 2026